Adaptec SCSI RAID 2200S Low-profile dual-channel Adaptec SCSI RAID 2200S is a 64-bit/66MHz Ultra320 RAID controller designed for mid-range and high-density servers. Advanced features include Adaptec's optimized disk utilization, Online Capacity Expansion, RAID Level Migration and full OS support. No more than two drives per SCSI bus.-SCSI ID’s -Library: ID 2-Drive 1: ID 3-Drive 2: ID 4. LTO-3 tape drives are Ultra160 devices. To put more than one drive on the bus you would require an Ultra320 controller to ensure there is enough bandwidth to run both drives simultaneously without running into bandwidth limitations. Close Windows installation and contact the device manufacturer for updated driver software for these devices: SCSI and RAID controllers: Intel(R) 82801ER SATA RAID Controller; The compatibility report will be saved to the current Windows desktop. This issue occurs with the. To install the driver: 1 Install and configure your Adaptec RAID controller and hard disk drives according to the instructions in 2 Create the driver disk as shown at the beginning of this chapter. Page 32: Adding The Controller To An Existing System. I have another Argosy USB storage device, which has the same problem with the Argosy USB storage device already fixed in 2.6.27.7. But this device has another product ID (840:84), so this patch adds a new entry into unusualdevs to fix the mount problem. I enclose here two patches: one against 2.6.27.8, and another against the latest linus-git.
Search the Knowledge Base:
Optimum SCSI configuration and troubleshooting for high performance tape drives
(KB # 5A9D11E0)
| Symptom: |
|---|
Failed backups due to SCSI bus instability. Errors located in the System log of Windows event viewer:
|
It is our experiance that swapping the SCSI cable(s) for new is the most common fix for SCSI I/O issues. |
|---|
